Will not remote start

Question

I have installed the EVO NIST1 kit, programed with the flash link and connected the white/black wire to the brown wire at the push to start button. When pressing the lock button, the EVO All interface module lights up blue with each press, but after the 3 presses it lights up red and yellow, then red. The dash does not light up and the brake lights do not come on when pressing the lock button.

Answer 1

First, turn ON all the A options. They are off right now. Default is ON and should be left on. https://fortin.ca/en/support/001A06755045/

 

Whichever RL1 or RL2 is conencted, try the other.

Also, there's a white/black wire from the evo that needs to be connected to the vehicles Start-Stop button.