2013 Camry Push to start

Question

We have installed a Autostart 2471TW-FM remote start with a EVO-ALL in a 2013 Camry Push to start. Remote start functions operate perfectly; vehicle starts, door locks/trunk all function correctly. Issue is after a remote start and takeover, the customer drives to destination and shuts off vehicle. Upon returning to the vehicle when touching the door handle to open with smart key the OEM alarm goes off and generates multiple random SEL codes.

One thing to note is the vehicle has had a OEM remote start installed in the past but was physically removed from the vehicle. Is it possible that there is programming in the ECU that cfould interfere with the signals from the EVO-ALL?

Any insight or ideas would be greatly appreciated.

Answer 1

Hi Jim,

When you say, "Issue is after a remote start and takeover,", does this mean that the vehicle actually does take over? Such as, remote start the vehicle, unlock the vehicle, open the door and driver away? Or does the vehicle shut down as soon as you open the door?

One thing to note is the vehicle has had a OEM remote start installed in the past but was physically removed from the vehicle. Is it possible that there is programming in the ECU that cfould interfere with the signals from the EVO-ALL?

As long as it was removed it shouldn't be a problem.