evo-all won't send start signal

Question

All hooked up to the 2006 chev cobalt, no wire from remote start to car wiring for crank wire- none od diagram. evo flashed to 4.06 but no crank. everything else perfect hooking up with a prostart autostarter, did program autostarter to use fortin...

Answer 1

Where is your yellow wire from the EVO-ALL going. If you answer ignition , then you should take a look at the guide again because this is a common mistake. It should go to accessory. This is about the only connection that does not go to ignition. Your Prostart should be on express kit as the default language and the EVO-ALL in D2D or else they don't understand eachother.

Comments

Thanks! Just realized the tech had the commnication wires to the ignition switch backwards! all good now!