Questions & Answers

Toyota camry TPMS cable

0 votes
I have a 2020 toyota camry, installed an evo-one and t harness, I interrupted TPMS cable as per installation but, the car starts fine, unlock the doors with oem remote but I have tpms light on, when tried to configure it by manual dealer instruction it shows "tpms malfunction visit your dealer" any ideas? Thanks
posté Mar 27, 2021 dans la catégorie Toyota par alejosmov@gmail.com (130 points)

2 Réponses

0 votes
try this if you have TPMS button, TPMS Relearn Button:

1. Ensure all tires are inflated to the pressure listed on the tire placard.

2. Start the engine and keep the vehicle in PARK.

3. Press the Tire Pressure Reset button three times.

4. Drive the vehicle for 10-30 minutes at 25mph or faster and the light will turn off once the sensors are registered. Refrain from reversing and driving in heavy traffic during the relearn process.

5. The Tire Pressure Reset button must now be pushed and held down until the TPMS light blinks three times to set the baseline tire pressures. 6. Drive the vehicle for 10-30 minutes, staying above 25mph when possible, and the light will turn off once the current tire pressure values are accepted.
répondu Mar 27, 2021 par Haidar Jabbar (22,390 points)
0 votes
tpms light is normal on remote start. We open the tpms circuit so that the OEM remote can remain functional.
répondu Mar 29, 2021 par derek g (339,570 points)
...