2023 nissan frontier

Question

Was able to program and set options via mobile programmer however despite a successful decryption vehicle says "wrong ID" on dashboard when remote starting.

Answer 1

Hello,

What is the S/N number to the unit?

 

Thank you.

Comments

Sn: 002B04 333422

---

Looking at the S/N number the module has not successfully completed the dcryptor process.

Please re program the module in the vehicle and re run the dcryptor process.

Best regards.

---

Yes the mobile programmer can be used to run dcryptor.

 

I also see this is a used evo. I would suggest performing a master reset to the unit before you try re programming it into another vehicle.

https://fortin.ca/en/download/61931/61931.pdf

 

Once the master reset is done, return to the flasher and re enable the options for the vehicle.

Once the options are re enabled then re program it in the vehicle and re run dcryptor.

---

Hey I know I'm a little late to respond but have done all you mentioned and it is starting, however, we have a the red immobilizer light lit when remote starting and no key take over. Any suggestions?

---

Hello,

You could set option D3 - door open shut down.

You could also try updating the unit to 72.54, re programming it, redcrypting it.

Best regards.