Questions & Answers

EVO-ALL vs EVO-ONE

0 votes
I installed a EVO-ALL in a 2007 dodge diesel and hate the fact that the starter stays engaged too long!  I have read in other postes that it is no adjustable in my modle year.   If i buy a EVO-ONE will it give me adjustale starter relese times?
posté Mar 25, 2018 dans la catégorie Dodge par Bret McKinney (190 points)

1 Réponse

0 votes
Please flash firmware 0.27 into the module then re program it into the vehicle and tell me if the crank time is better.
répondu Mar 26, 2018 par derek g (346,810 points)
I have tried that but I will try it again.  It seemed to be about 4 seconds.  The truck really only needs about a 2 second crank to start and if it’s cold and needs extended crank times it will fire off on the evo-all’s second attempt.
I tested firmware .27 with no luck. It still over cranks!  In the comments on .27 it says “max crank 4sec”.  Crank  time is the same possibly a little better but I’m going to blow up my starter soon.  Will the EVO-ONE allow me to adjust crank times?

 

Thanks for any help!!!

This person had the exact same issue with the exact same model year pickup with the exact same results.  

https://fortin.ca/en/qa/50013/2007-ram-cummins-starter-runs-for-1-2-seconds-after-engine-starts?show=50013#q50013

My pickup was made half way through 2007.  Is it possible that it’s firmware needs to be set for 2008?

 

Yes the evo-one has a tachless setting that allows you to adjust crank time.
Tried other version 74.18 I think it was, as recommended on the phone and a few others, still no luck.  Ordered evo-one and will poste how it works when installed.  

Thanks for the help!
...