Questions & Answers

intermittent crank no start 3 parking light flashes Mitsubishi Eclipse 2012 with oem alarm

0 votes

This is driving me crazy... It works and then it does not... Need some help please.

Everything is connected per instructions (Guide # 24871), except; I had to disconnect the (A8 dk. blue) to Driver Door pin, as it left the Door ajar on constantly. 

The Yellow loop has been cut on the fortin unit.

Fortin unit SN: 002B04 251304

Crank no start and 3 parking light flashes. 

When Press lock from OEM keyfob nothing flashes in the fortin unit.

 Setup in Flash link:

Bypass

Firmware 86.05

Hardware inside 4.0

A1 on

A2 off

A3 on

A4 on

A5 on

A6 on

A7 on

A8 off

A9 on

A10 off

A11 on

B1 on

C1 on

D2 on

D3 off

D4 off

D5 on

D6 off

E4 off

E5 off

 

Remote start

Firmware 1.26

Hardware inside 7.0

2 off

3 1

4.1

6.1

7.1

8.1

9.1

10.1

11.1

11.4

12.1

13.2

14.1

15.1

16.5

18.1

19.1

20.8

21.1

24.1

25.6

26.1

29.1

30.1

31.4

32.5

33.1

35.2

36.2

37.1

38.1

39.2

posté Jan 14 dans la catégorie Mitsubishi par Mikko (240 points)

2 Réponses

+1 vote
 
Meilleure réponse
The blue will not flash on lock since support for 3xlock start is not listed (first thing listed under Installation Highlights).  https://fortin.ca/en/vehicles/mitsubishi/eclipse/2012-standard-key/compatibility/

 

For the just cranks and no start, please try firmware 74.22 instead of the latest. RESET the unit and then reprogram. Also note, DCRYPTOR will not bre required when using 74.22. Once the in car programming is done, you will not see red/yellow alternate at step 5. This is normal since you will not have to run through the dcryptor.

 

If it continues to be intermittent, please go over all connections. Ideally no t-taps or similar type of connectors should be being used.
répondu Jan 15 par Robert T (301,940 points)
élue Jan 23 par derek g
Thank you for Robert! That fixed it. Much appreciated.
Excellent, glad it worked out!
0 votes
This module has been installe since July of 2022, is this intermittent start issue recent? If so, most intermittent start issues are caused by connections that maybe loose or have cold solder joints.
répondu Jan 15 par J M (64,060 points)
Hi,

It has been like this since I installed it, now in the wintertime, it starts to just annoy more, if you know what I mean.

I'll try what Robert is suggesting.

Thanks
...