2024 SUPERB

Question

Hello. I want to install autostart on 2024 SuperB. The brake pedal wire is located in the same place as in similar Volkswagens. When applying + to this wire, the brake light comes on... But it does not help with autostart. Is there another option?

Answer 1

Hello,

Do all 3 brake lights come on? If its only the 2 side markes come on the its then wrong brake wire.

Best regards.

Comments

Yes, all 3 are lit. Just as they light up when you press the pedal, they also light up from this wire (if the ignition is on).

---

hhhhmmmmm should be the correct wire then, when you remote start it do all 3 brake lights come on? Does the dash light up?

---

Yes, it lights up, but nothing happens. I also try mechanically... I connect + on this wire, then I press the start-stop button, but only the ignition turns on...

---

I even got to the ABS in the bonnet space. I checked all the wires there. One wire (black and red) releases + when you press the pedal, but it didn't help me either. There are CAN wires there and probably the information is taken from them.

---

"I also try mechanically... I connect + on this wire, then I press the start-stop button, but only the ignition turns on..."

- You would need to have a smart key with the battery inside the vehicle. If this does not work then remote start wont work either because Fortin starts the car the same way, Fortin module sends + to brake then pulse the pts to turn car on.

Best regards.

---

Yes, the key is in the car, but it does not see the brakes from this wire. From the front (with ABS) with CAN-om gives information. And Fortin will not be able to simulate pressing the brake pedal via CAN?

---

are you using 61.32 fw? this car looks kinda like a jetta i would think? just skoda based

---

I'll have a look