Evo-One Installed Thar one 7

Question

i have a 2017 tundra g-key. followed instruction made sure evo one is well programed for my application. i want to use the 3x lock which is supported. after all installation is done and bypass when i lock 3x is Parking light are flashing 3x. what is my solution

Answer 1

What is the service number to the module?

Comments

my module S/N #002B04 003558. my other question is could it be my OEM remote aint good enough? i got the plain jane lock,unlock,panic on the remote

---

Did you cut the yellow loop?

---

yellow loop is cut, recheck all my conections all is fine, did the programation on evo one as per the instruction must have check the evo one 3-4times to make sure i got the right options for bypass and remote start, hood pin is well installed and gets compress all the way.

---

Is the red led underneath the yellow loop lit solid?

 

When you press lock 3x what do the led's on the module do?

---

light under the yellow flashes not solid...when i press lock the blue light flashes and once i press the 3rd time my parkings flash 3 times. no other lights light up on the module

---

Not sure, Probably best if you call us with the car and module at this point.

 

Mon-Fri

8-6 est

1-877-336-7797.