2008 Jeep Patriot Evo-Alll slow flashing blue light

Question

Here is what I have:

2008 Jeep Patriot Automatic Transmission, EVO-ALL, ProStart CT4311-TW, Jeep Patriot T-Harness.
After programming evo-all, it only slow- flashes Blue LED.

CT-4311 is connected D2D to evo all.

Yellow ignition wire from CT-4311 connected to Evo-All yellow ignition wire connected to yellow t-harness wire.

purple Mux wire connected to evo all.

CT4311 park lights wire wired to Jeep parking lights (white/purple)

when 3 lock press on factory remote.....nothing, slow flashing blue light.

when lock button on CT4311 remote pressed, CT-4311 clicks, no lock, park lights flash 1 time

when unlock button on CT4311 remote pressed, CT-411 clicks, no unlock, park lights flash 2 times

when start button pressed, ignition comes on, dash lights up, no start, no crank. Repeats 2 more times.

 

any suggestions?

I am thinking there must be something in the settings/options of EVO-All.  I have the programmer and software.  I just selected the "default" options when flashing.

 

thanks

Mike

Answer 1

Sounds like the evo-all needs a master reset.

 

Follow this guide for the master reset procedure: https://fortin.ca/en/download/61931/61931.pdf

 

Once that is done re enabled the D2D option in the evo-all protocols using the flash link updater.

 

Then re program it in the vehicle and re test.