Autostart does not work, Mazda 3, 2018, auto

Question

My fight continues, I hope I win  Initially I programmed the keys incorrectly and had to do everything again, I reset and flashed to version 71.47, I successfully programmed according to instructions 62681, I did everything step by step and everything went well, but when I press the car lock button three times to start the engine, the red then yellow indicator lights up, the unit clicks a couple of times and that's it, the engine does not start. EVO-ALL, Thar Maz1. It reacts to locking and unlocking and the blue indicator lights up. Please help me figure this out.

Answer 1

Hello,

Is the vehicle equipped with a factory hood pin?

Comments

No, but I installed the one that came with the kit. I tried all the options with and without it and I turned it off in the settings. The result is the same, the car does not start.

---

You need to do the jumper under the hood at the fuse box if the vehicle is not equipped with an oem hood pin. https://cdn02.fortin.ca/download/62681/EVO-ALL_IG_TSA_BI_MAZ1-3_PTS_2014-2017_DOOR_V2_E_62681.pdf

---

I understand what you mean, but I installed the limit switch that came with the kit, the contact is good, it closes. What you are offering me and what I have are the same. In this case, I can simply connect it to ground and that's it, but I did this and it still won't start.