2003 TOYOTA HIGHLANDER 3.0 JUST CRANKING NO START

Question

HELLO, I JUST SET UP A 2003 TOYOTA HIGHLANDER 3.0,WIRING AND PROGRAMMING SEEMS OK BUT ITS ONLY CRANKING,IT DOES NOT START,I TRY TO PUT IN THE KEY TO THE BARREL AND STILL THESAME,NO START, CAN ANYONE HELP ME FOR THIS PROBLEM....

 

THANKS

Answer 1

What module is used ? What remote starter ? What's the service number on the module.

Comments

hello, its evo-one and the service number is 002b07035055,with rf kit,its just cranking no start....thanks

---

In the REMOTE STARTER side, function 2 NEEDS to be set to mode 4.

---

Also function 20 to mode 2

---

hi, i just did evrything and still not working,the customer just got pist off and he want to removed evrything, its frustrating,i know fortin is best and easy to install but most i did like the toyota is very frustrating,instead of  getting more customer now its on reverse....

---

If the vehicle does not start with the OEM key next to the barrel and the immobilzer wires (
RX and TX) from the evo temporarily disconnected, then there is an issue with how the ignition switch wires are being powered up, this vehicle NEEDS TO START with an oem key in the barrel.