2013 Fusion Evo All stand Alone start on single lock only and won t start on three lock. Randomly.

Question

I ve installed the Evo All that was previously ready for a 2014 Dodge . I did reprogram to 2013 Fusion with regular key.

Is there an update for Stand Alone Ford Fusion program ?

Should I have use a basiv Evo All instead of one ready for a Dodge ?

Answer 1

Can you send us the service number of the Evo-All module so we can check the firmware and options selected.

 

Also, did you do a master reset before you flashed the unit for the Ford Fusion?

Comments

I don't know what would be a Master reset.   Tell me what to do for master reset . Then I will reprogram with the firmware you tell me to .

Unfortunately I m not with the car now and will be able to see it only in weekends.

 

Can I send you what I have without being online with you ?

---

https://fortin.ca/en/qa/search?q=master+reset

---

And which firmware should I reprogram for my 2013 Fusion ?

---

Hey Darren, the link you provided doesn't work.

 

Master Reset:

1.Unplug everything from Evo All

2. Push and hold down programming button.

3 Plug in black datalink connector.

4. Release programming button when RED led lights up.

5. Push and hold programming button again until all 3 leds flash in sequence (Blue...Red...Yellow....Blue/Red...)

6. Release button and unplug datalink connector.

7. Master Reset done!

---

Latest Ford firmware is 71.27. When you plug the unit in the flash-link, select the vehicle, then go in EVO-ALL Updates, it will show you the firmwares available for Ford.

---

I did a master reset .  reprogram to 71.27 then I saved option C1  and D1

I did reprogram evo all to my car . it s not working Evo does not keep otions that I selected after master reset.

 

Besides that , since I had it done once , will I need to reactivate the dealer remote  option at the Ford dealer  ?

 

Thanks , Marc.

---

Service # is :  001A06 394156

---

I made more work on my side . I did delete then re-install flash link manager .

I plug it in , then saw D1 option was not activated. I did click D1 and " Save Option "

Disconect everything , let it sit , then replug everything . Now all wanted options are showing . Will wait next weekend to retry on the car .

Feedback coming then. Thanks for help so far .

---

Main reason i have seen this happen is because the Flash link is not in the right connection mode.. Before pluggin in the EVO to the flash-link, make sure it says Connection Mode : Bypass on the bottom right corner. If it says Connection Mode : Remote Starter, click on the Toggle button.