Toyota Prius V 2012 EVO-ALL 4 RED FLASHES

Question

I installed an EVO-ALL on my 2012 Toyota Prius V (Hybrid, push to start) in standalone mode. When I try to remote start the car using the OEM LOCK-LOCK-LOCK sequence, the red LED on the EVO-ALL turns on, waits a few seconds, and then flashes four times. The car doesn't start, and the dashboard doesn't turn on either. Additionally, I've noticed that the security red light was flashing during the start sequence. The serial number is 001A07 076831. I've double-checked the wiring and FlashLink programming, and everything seems correct to me.

Can someone help me?

Answer 1

Hello,

Please perform a master reset on the unit in the vehicle following these instructions:

https://cdn.fortin.ca/en/download/61931/61931.pdf

 

Once that is done, enable options C1, D1, D3 & D6. Turn off option A11. Do not touch any of the other options.

Next flash firmware 79.59 into the unit. Then re program it in the vehicle and re test remote start.

 

Best regards.

Comments

It worked! Thank you very much.

---

Glad you got it going!

Best regards.