stand alone Nissan/Infiniti PTS no keyport

Question

Hi, in order to activate lock and unlock from external output device , Do I need to connect the lock and unlock wires from the car or will be recognized from the evo all? Remote start works perfect on Stand alone , when I send negative pulse to the external input door look or unlock , the module blink blue but doors remains same . Remote start input works right, only lock and unlock not response. thanx

Answer 1

I believe you will need to connect the lock and unlock wires from the evo all to the vehicle.

Comments

Well Ive connected the lock and unlock wires from evo all to the vehicle , green and white from evo all to violet and red from vehicle ( Infiniti qx56 2012) 12 v when rest and 0 v when pressing lock or unlock ) after that I gnd the external outputs from evo , light blink one time blue and nothing happened, so what support to do the evo? I've also test the lock and unlock wire from evo while I und the outputs but nothing happens . suggestions and advices are welcome