Evo-all module does not shut off after "push to start button" and shuts off after pressing braker pedal.

Question

I have a 2019 Ram 1500 (newer model, not classic).  The OEM remote activates the remote start and is working properly.  When I get in the truck and push the "push to start" button once to deactivate the module, nothing happens.  When the brake pedal is pushed, it shuts off and I have to restart the truck with the "push to start" button.  I have tried programming the module several different ways with no luck.  Thanks in advance.  Chuck

Answer 1

Typically caused by not jumping the yellow/red and yellow/green wires from the RED connector together.

 

Takeover would also not work if the evo did not see you unlock the car. To properly test the system,

1- close all doors with you outside.

2- remote start the truck

3- press unlock and get in

4- press the start/stop once

5- press brake

Comments

I also had the issue with my 2019 Ram 2500 diesel with push to start. I found that pressing and releasing the brake pedal quickly keeps truck running. I didnt have to push the button first or at all. Hope this helps