Français

Questions & Answers

please help me in evo one

hello

i have evo one in my kia rio 2013

work with excalibur rf51 edp kit

from 4days somthing went wrong and not working

how can i reset defaults in evo one

i dont have the programmer tool

thanks

asked Mar 1, 2018 in Kia by SHERIF REZKALLAH (370 points)

1 Answer

If you reset the module and do not have access to the flash link you will not be able to re enable the options in the bypass...What is the issue you are experiencing?

answered Mar 1, 2018 by derek g (346,810 points)

the rf kit not working

i setup the evo one again till the blue led

but i cant setup the rf kit

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

what can i do

please help me

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

Service No: 002B07210205

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

Was the RF kit working before? Or has it never worked?

commented Mar 1, 2018 by derek g (346,810 points)

Yes sir working perfectly before My kids push the brake and play with car key After that didn't work I don't know what happened Please help

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

I think something happened in programming but the rf kit didn't accept like before

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

I think something changed in the programming of evo one so I need help... I don't know what to do

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

Is the red led on underneath the yellow loop?

commented Mar 1, 2018 by derek g (346,810 points)

you mean the red led under the yellow wire?

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

if you mean this one

first yes it is on

after that i try to reprogram the evo one with the car and now this led red off

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

If the red led is on that means the module is in valet mode.

try the following to enter or exit valet mode:

- Ignition ON

- 3x on the valet switch

- ignition OFF

Also try to follow this link and re progrm the remote to the evo:

http://cdn.fortin.ca/download/25141/excalibur-rf-31-edp-install-guide-25141.pdf

commented Mar 1, 2018 by derek g (346,810 points)

how can i change the mode

i didnot understand this point

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

Oh yes that is correct you said you dont have a flash link updater.

Simply follow the programming procedure on the last page of the guide I linked above.

commented Mar 1, 2018 by derek g (346,810 points)

I did but nothing changed..I notice that before when I setup the evo one with my car and press the valet 5 times the car led light on with each valet... Now no car light like before...and I did all steps but nothing...please help me

commented Mar 1, 2018 by SHERIF REZKALLAH (370 points)

WAIT FOR YOUR REPLY SIR

PLEASE HELP ME

commented Mar 2, 2018 by SHERIF REZKALLAH (370 points)

If the red light is on solid again you have put it back into valet mode, like before to enter or exit valet mode you do the following:

- Ignition ON

- 3x on the valet switch

- ignition OFF

commented Mar 2, 2018 by derek g (346,810 points)

So I must make the valet mode off right? The red led must be off,

commented Mar 2, 2018 by SHERIF REZKALLAH (370 points)

Yes light must be off.

commented Mar 2, 2018 by derek g (346,810 points)

I did all steps and the light off now.... I setup the evo one with the car till the blue led... I try to program it but nothing...no response... Press the valet till the led light flashing fast then press the valet 5 times for program the rf.... Nothing changed

commented Mar 2, 2018 by SHERIF REZKALLAH (370 points)

Before when I program the evo one with the car when I press the valet the park light and anterior led light switch on one with each press...now no.... Why?

commented Mar 4, 2018 by SHERIF REZKALLAH (370 points)

the park lights not flashing like before during programming the evo one with the rf kit

what is the problem

please help

commented Mar 4, 2018 by SHERIF REZKALLAH (370 points)

the park lights not flashing like before during programming the evo one with the rf kit

what is the problem

please help

commented Mar 4, 2018 by SHERIF REZKALLAH (370 points)

Wait for your reply sir to help me please

commented Mar 5, 2018 by SHERIF REZKALLAH (370 points)

Hello....I wait you answer sir

commented Mar 5, 2018 by SHERIF REZKALLAH (370 points)

...